How to Fix the Hotwav Venus R8 Hang On Logo Problem with Flash File
How to Fix the Hotwav Venus R8 Hang On Logo Problem with Flash File
If you have a Hotwav Venus R8 smartphone that is stuck on the logo screen and does not boot up, you may need to flash it with a new firmware file. Flashing is a process of installing a new software on your device, which can solve various issues such as bootloop, virus infection, or system corruption. In this article, we will show you how to flash your Hotwav Venus R8 with the final version of the flash file that can fix the hang on logo problem.
Hotwav Venus R8 Flash File Hang On Logo Fix Final Versone
Requirements
Before you start flashing your Hotwav Venus R8, you will need the following things:
A Windows PC or laptop
A USB cable
A backup of your personal data on your phone
The Hotwav Venus R8 flash file final version (download link below)
The SP Flash Tool software (download link below)
The Hotwav Venus R8 USB driver (download link below)
Steps to Flash Hotwav Venus R8
Once you have all the requirements ready, follow these steps to flash your Hotwav Venus R8:
Extract the downloaded flash file, SP Flash Tool, and USB driver to your PC.
Install the USB driver on your PC.
Run the SP Flash Tool as administrator.
Click on the "Download" tab and then click on the "Scatter-loading" button.
Browse and select the scatter file from the extracted flash file folder. It should be named "MT6580_Android_scatter.txt".
Make sure all the boxes are checked and then click on the "Download" button.
Turn off your Hotwav Venus R8 and remove the battery if possible.
Connect your phone to your PC via USB cable while holding the volume down button.
The SP Flash Tool will detect your phone and start flashing it. Wait for the process to complete. It may take several minutes.
When the flashing is done, you will see a green tick mark on the SP Flash Tool. Disconnect your phone from your PC and insert the battery if you removed it.
Turn on your phone and wait for it to boot up. It may take longer than usual for the first time.
Congratulations!
You have successfully flashed your Hotwav Venus R8 with the final version of the flash file that can fix the hang on logo problem. You can now enjoy using your phone without any issues. If you have any questions or problems, feel free to leave a comment below.
Download Links
Here are the download links for the flash file, SP Flash Tool, and USB driver that you will need to flash your Hotwav Venus R8:
Hotwav Venus R8 flash file final version: https://www.mediafire.com/file/9y9xq6x7z6z3w3w/Hotwav_Venus_R8_Flash_File_Hang_On_Logo_Fix_Final_Versone.zip/file
SP Flash Tool: https://spflashtool.com/download/SP_Flash_Tool_v5.1952_Win.zip
Hotwav Venus R8 USB driver: https://androidmtk.com/download-hotwav-usb-drivers
Disclaimer
Please note that flashing your phone is a risky procedure that may void your warranty or damage your device. We are not responsible for any damage or data loss that may occur during or after flashing your phone. Please proceed at your own risk and follow the instructions carefully. Backup your data before flashing and do not flash any file that is not compatible with your phone model. e0e6b7cb5c